PIC16F1516T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1516 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 17x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 8192 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1516T-I/SS Overview
Due to the benefits of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. You can find it in the package of Tape & Reel (TR). There is a PIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. It has a number of 25I/Os. In order to find similar components, it has a base part number of PIC16F1516. At DUAL, its terminals are located. Currently, it consists of 28 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 28 pins are used in its construction. This device has a total of 28 pins. In the subcategory of Microcontrollers, this component is included. A device with a memory size of 14kB can store programs and data. A 2.5/5V power source powers it. Working at a frequency of 20MHz results in excellent efficiency. 3 timer/counters are present. As part of the PIC CPU family, this component is included. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. It works with an oscillator type Internal.
PIC16F1516T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1516T-I/SS Applications
There are a lot of Microchip Technology PIC16F1516T-I/SS Microcontroller applications.
- Oscilloscopes
- Temperature sensing and controlling devices
- Air fryers
- Calculators
- Multi-meter
- Electromechanical control
- DDC control
- Projectors
- Current meter
- Laminators
