PIC16F1518-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F1518 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 17x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1518-E/SP Overview
There is an option to purchase it in the 28-DIP (0.300, 7.62mm) package, which saves space. Through Hole is the way to mount it. There is a Tube package available for it. A core processor of PIC is present in the device. Work should be done at -40°C~125°C TA. There is FLASH program memory in it. 25 I/Os can be found on it. Based on the PIC16F1518 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 28 terminations present. This electrical component is part of the PIC? XLP? 16F series. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 28 pins used in the construction of this device. Total number of pins is 28. In Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 28kB. A 2.5/5V source is used for powering it. Working at a frequency of 20MHz results in excellent efficiency. 3 counters/timers are currently active. It is part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 2.5V. There is an oscillator type Internal used in this circuit.
PIC16F1518-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1518-E/SP Applications
There are a lot of Microchip Technology PIC16F1518-E/SP Microcontroller applications.
- Vacuum cleaners
- Kindle
- Entertainment-radios, CD players, televisions
- Answering machines
- Washing machines
- Oscilloscopes
- Fire detection & safety devices
- Electrocardiogram (EKG)
- DDC control
- Scanners
