PIC16F1614-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | IT ALSO OPERATES AT 16 MHZ IN 2.3V MINIMUM SUPPLY |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC16F1614 |
| JESD-30 Code | S-PQCC-N16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b; D/A 1x8b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
PIC16F1614-E/ML Overview
As a result, it is available in the 16-VQFN Exposed Pad package. This is mounted using the Surface Mount method. This item can be found in package Tube. Device with PIC core processor issupported. Work should be done at -40°C~125°C TA. FLASH is the type of program memory used by it. A total of 12 I/Os are present. To find comparable components, use the PIC16F1614 base part number. A QUAD position is assigned to its terminals. 16 terminationals are present. In the PIC? XLP? 16F series, this electrical component is found. The 3V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. In the device, there is a memory capacity of 7kB which may be used to store programs and data. It is highly efficient when it works at a frequency of 32MHz. There is also the property of IT ALSO OPERATES AT 16 MHZ IN 2.3V MINIMUM SUPPLY. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. Using oscillator type Internal makes it work.
PIC16F1614-E/ML Features
16-VQFN Exposed Pad package
Mounting type of Surface Mount
PIC16F1614-E/ML Applications
There are a lot of Microchip Technology PIC16F1614-E/ML Microcontroller applications.
- Oil and gas
- Light sensing & controlling devices
- Fabric
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital cameras
- Tape drives
- Set-top boxes
- Television
- Virtual reality VR robots
- Fire detection & safety devices
