PIC16F1614-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2014 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC16F1614 |
| Operating Supply Voltage | 5.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b; D/A 1x8b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Number of UART Channels | 1 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 2 |
| Height | 3.302mm |
| Length | 26.162mm |
| Width | 3.302mm |
| RoHS Status | ROHS3 Compliant |
PIC16F1614-I/P Overview
Due to the benefits of saving space, it is available in the 14-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. It comes in the package?of a Tube. It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 12 I/Os are present on the device. A comparable component can be found by using the base part number PIC16F1614. At DUAL, its terminals are located. There are a total of 14 terminations in it. In the PIC? XLP? 16F series, this electrical component is found. Using the 3V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A number of 14 pins are used to construct it. The method of Through Hole is used to mount it. Using the devices' 7kB memory size, you can store programs and data. It performs extremely well at a frequency of 32MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5.5V in their designs. There are currently 5 timers/counters set up on the system. It works with an oscillator type Internal.
PIC16F1614-I/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
PIC16F1614-I/P Applications
There are a lot of Microchip Technology PIC16F1614-I/P Microcontroller applications.
- DCS control intelligent sensor
- Automatic control
- Hearing aids
- Answering machines
- Temperature sensing and controlling devices
- Coffee machines
- Heater/Fan
- Graphic terminals
- DVD\DV\MP3 players
- Dryers
