PIC16F1703-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16F1703 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, RS-232, SPI, UART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 12 |
| Nominal Supply Current | 8μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, LINbus, SPI |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC16F1703-I/ST Overview
Due to the benefits of saving space, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. Surface Mount is the way to mount it. It is available in the Tube package. PIC core processor is present on the device. Work should be done at -40°C~85°C TA. There is FLASH program memory in it. The device has 12 I/Os. Based on its base part number of PIC16F1703, other similarly-sized components can be found. The terminals of this device are set to DUAL. It has 14 terminationals. It is a member of the PIC? XLP? 16F series of electrical components. Because of the 3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 14 pins used in the construction of this device. The method of Surface Mount is used to mount it. Microcontrollers contains this component. In order to store data and programs, the devices have a memory size of 3.5kB. Power is provided by a source of 2.5/5V. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. There are 3 timers/counters. PIC CPUs are included in this part. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. There is an oscillator type Internal used in this circuit.
PIC16F1703-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1703-I/ST Applications
There are a lot of Microchip Technology PIC16F1703-I/ST Microcontroller applications.
- Process control devices
- ECG machine
- Fabric
- DDC control
- Vacuum cleaners
- Aerospace navigation systems
- Accu-check
- Dialysis machines (performs function of liver)
- Refrigerators
- Hearing aids
