PIC16F1778-I/MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-UQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2016 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES WITH 2.3V MIN@16 MHZ; DAC 4-CH 5-BIT AVAILABLE |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Base Part Number | PIC16F1778 |
| JESD-30 Code | S-PQCC-N28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 17x10b; D/A 3x5b, 3x10b |
| Has ADC | YES |
| DMA Channels | NO |
| PWM Channels | YES |
| DAC Channels | YES |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 0.6mm |
| Length | 6mm |
| Width | 6mm |
| RoHS Status | ROHS3 Compliant |
PIC16F1778-I/MX Overview
As a result, it is available in the 28-UQFN Exposed Pad package. Mounted using Surface Mount. It comes in a Tube package. Device with PIC core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. There are 25 I/Os on it. Based on its base part number of PIC16F1778, other similarly-sized components can be found. A QUAD position is assigned to its terminals. This circuit consists of 28 terminationals. The PIC? XLP? 16F series contains this electrical component. It is possible to achieve high efficiency with a 3V supply voltage. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. In the device, there is a memory capacity of 28kB which may be used to store programs and data. At a frequency of 32MHz, it can achieve excellent efficiency. It has the property of ALSO OPERATES WITH 2.3V MIN@16 MHZ; DAC 4-CH 5-BIT AVAILABLE as well. Normal operation requires a supply voltage (Vsup) that is higher than 2.5V. There is an oscillator type Internal used in this circuit.
PIC16F1778-I/MX Features
28-UQFN Exposed Pad package
Mounting type of Surface Mount
PIC16F1778-I/MX Applications
There are a lot of Microchip Technology PIC16F1778-I/MX Microcontroller applications.
- Petrochemical
- Oil and gas
- DCS control intelligent sensor
- Air fryers
- Teletext terminals
- Blood pressure monitors
- Radio
- Home appliances
- Electromechanical control
- Heater/Fan
