PIC16F1783-E/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1783 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 0.55mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1783-E/MV Overview
For the purpose of saving space, it is available in the 28-UFQFN Exposed Pad package. Surface Mount is the way to mount it. You can find it in the package of Tube. It is equipped with a PIC core processor. Working at -40°C~125°C TA temperature is recommended. There is FLASH program memory in it. There are 24 I/Os on the board. It has a part number of PIC16F1783 that can be used to locate similar components. The terminals of this device are located at QUAD. This circuit consists of 28 terminationals. The PIC? XLP? 16F series contains this electrical component. Because the supply voltage is 3V, high efficiency can be achieved. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 28 pins used in the construction of this device. On it, there are 28 pins. It falls under the category of Microcontrollers. The devices have a memory size of 7kB that can be used to store programs and data. 10mA is the maximum supply current. Powered by a 2.5/5V source. At a frequency of 32MHz, it exhibits excellent efficiency. A total of 3 timers/counters have been set up. CPU family PIC comprises the part. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.7V. Using an oscillator type Internal, it operates.
PIC16F1783-E/MV Features
28-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1783-E/MV Applications
There are a lot of Microchip Technology PIC16F1783-E/MV Microcontroller applications.
- DCS control intelligent sensor
- Robotic prosthetic limbs
- Calculators
- Kindle
- Removable disks
- Air fryers
- Broadband technology, video and voice processing
- Projector
- Digital cameras
- Aerospace navigation systems
