PIC16F1783-E/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 32MHz |
| Base Part Number | PIC16F1783 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.08mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1783-E/SP Overview
There is a 28-DIP (0.300, 7.62mm) package available to save space. It is mounted using the way of Through Hole. It is available in the Tube package. Devices with PIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. There are 24 I/Os on the board. Based on its base part number of PIC16F1783, other similarly-sized components can be found. DUAL is the location of its terminals. It has 28 terminationals. In the PIC? XLP? 16F series, this electrical component is found. By using a 3V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 28 pins are used to construct it. There are 28 pins on it. This component is a part of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 7kB. It should be noted that 10mA represents the maximum supply current. Power comes from a source of 2.5/5V. The system is highly efficient when working at a frequency of 32MHz. 3 timers/counters are in use. CPU family PIC comprises the part. Normally, the supply voltage (Vsup) should remain above 2.7V. The oscillator type Internal is used to operate the device.
PIC16F1783-E/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1783-E/SP Applications
There are a lot of Microchip Technology PIC16F1783-E/SP Microcontroller applications.
- Aerospace navigation systems
- Binding machines
- Industrial robot
- Digital cameras
- Teletext terminals
- Data acquisition and control
- Telephone sets
- Firewalls
- Embedded gateways
- Wastewater treatment
