PIC16F1786-I/SP
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | PIC16F1786 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 2.1mA |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| Number of Programmable I/O | 25 |
| Integrated Cache | NO |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
PIC16F1786-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. In this case, it is mounted using the method of Through Hole. This item can be found in package Tube. There is a PIC as core processor in this device. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. A total of 24 I/Os are available on this device. It has a part number of PIC16F1786 that can be used to locate similar components. DUAL is the position of its terminals on the board. 28 terminationals are present. PIC? XLP? 16F is the series number of this electrical component. Because the supply voltage is 3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. The structure is constructed from 28 pins. Mounting is performed in accordance with Through Hole. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 14kB. Power is provided by a source of 2.5/5V. Using a frequency of 32MHz, it is very efficient. A total of 3 timers/counters have been set up. A chip with 25 programmable inputs/outputs is available. During normal operation, the supply voltage (Vsup) should be kept above 2.5V. The oscillator type Internal is used to operate the device.
PIC16F1786-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1786-I/SP Applications
There are a lot of Microchip Technology PIC16F1786-I/SP Microcontroller applications.
- Smartphones-calling, video calling, texting, email
- Auto-breaking system
- Graphic terminals
- Multi-meter
- Fire detection & safety devices
- DCS control intelligent sensor
- Data acquisition and control
- Teletext terminals
- Light sensing & controlling devices
- Vacuum cleaners
