PIC16F1786T-I/SS
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1786 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Interface | I2C, LIN, SPI, UART, USART |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 7.5mA |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Integrated Cache | NO |
| Number of Timers | 3 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
PIC16F1786T-I/SS Overview
There is a 28-SSOP (0.209, 5.30mm Width) package available to save space. Surface Mount is the way to mount it. It comes in the package?of a Tape & Reel (TR). PIC core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 24 I/Os on it, which makes it a very simple device. Based on its base part number of PIC16F1786, other similarly-sized components can be found. DUAL is the position of its terminals on the board. It has 28 terminationals. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. The component is included in Microcontrollers. The maximum supply current is set at 7.5mA. There is a source of power of 2.5/5V that powers this device. At a frequency of 32MHz, it exhibits excellent efficiency. Using 3.6V's adaptability as a supply voltage allows designers to maximize its use. It works with an oscillator type Internal.
PIC16F1786T-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1786T-I/SS Applications
There are a lot of Microchip Technology PIC16F1786T-I/SS Microcontroller applications.
- Aerospace navigation systems
- Microwave ovens
- Virtual reality VR robots
- Heart rate monitors
- Industrial instrumentation devices
- Laminators
- Multi-meter
- Petrochemical
- Smoke alarms
- Keyboards
