PIC16F1788-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1788 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 24 |
| Nominal Supply Current | 2.1mA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x12b; D/A 1x8b, 3x5b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 25 |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1788-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. Surface Mount is used for mounting. You can find it in the package of Tube. The device has a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. The device has 24 I/Os. To find comparable components, use the PIC16F1788 base part number. The terminals are positioned at DUAL. It has 28 terminationals. There are a number of electrical components in the PIC? XLP? 16F series, including this one. Using the 3V supply voltage allows for high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed with 28 pins. The component is included in Microcontrollers. In the device, there is a memory capacity of 28kB which may be used to store programs and data. There is 2.5/5V power source in this device. The system is highly efficient when working at a frequency of 32MHz. 3 timers/counters are in use. The part is a part of the PIC CPU family. There are a total of 25 programmable I/Os. Normal operation requires a supply voltage (Vsup) above 2.5V. The oscillator type Internal is used to operate the device.
PIC16F1788-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1788-I/SS Applications
There are a lot of Microchip Technology PIC16F1788-I/SS Microcontroller applications.
- Temperature sensing and controlling devices
- Leakage current tester
- Gas monitoring systems
- Magnetic resonance imaging (MRI)
- Instrument control
- Blenders
- Teletext terminals
- Food and beverage
- Wastewater treatment
- Computed Tomography (CT scan)
