PIC16F1789-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 40-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 40 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1789 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | I2C, SPI, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 2.1mA |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PSMC, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 14x12b; D/A 1x8b, 3x5b |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 36 |
| Number of ADC Channels | 14 |
| Number of I2C Channels | 1 |
| Height | 500μm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1789-I/MV Overview
For space savings, it is available in the 40-UFQFN Exposed Pad package. Mounted using Surface Mount. Package Tube contains it. It is equipped with a PIC core processor. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. 35 I/Os are present on the device. To find comparable components, use the PIC16F1789 base part number. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 40 terminations present. It is a member of the PIC? XLP? 16F series of electrical components. As a result of the 3V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 40 pins are used to construct it. It is one of the components included in Microcontrollers. The devices have a memory size of 28kB that can be used to store programs and data. A 2.5/5V source of power is being used to run it. Using a frequency of 32MHz, it is very efficient. There are currently 3 timers/counters set up on the system. PIC CPUs are included in this part. There are 36 programmable input/output ports on the chip. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.5V. Using a Internal oscillator type, it works well.
PIC16F1789-I/MV Features
40-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1789-I/MV Applications
There are a lot of Microchip Technology PIC16F1789-I/MV Microcontroller applications.
- Coffee machines
- Nintendo
- Data acquisition and control
- Robots
- Gas monitoring systems
- Medical instruments chromatographs
- Aerospace navigation systems
- Dialysis machines (performs function of liver)
- Smartphones-calling, video calling, texting, email
- Fax machines
