PIC16F1825-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1825 |
| Pin Count | 14 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 12 |
| Number of ADC Channels | 8 |
| Number of PWM Channels | 4 |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1825-I/ST Overview
As a result, it is available in the 14-TSSOP (0.173, 4.40mm Width) package. The way of Surface Mount is used to mount it. It comes in the package?of a Tube. The device runs in PIC core processor. Work should be done at -40°C~85°C TA. Its type of program memory is FLASH. There are 11 I/Os on it, which makes it a very simple device. To find equivalent components, use its PIC16F1825 base part number. At DUAL, it has its terminals. A 14 termination is contained within it. Part of the PIC? XLP? mTouch? 16F series, this electrical component is used in a variety of applications. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 14 pins. It is equipped with 14 pins in total. This is a component included in Microcontrollers. Using the devices' 14kB memory size, you can store programs and data. At a frequency of 32MHz, it can achieve excellent efficiency. A total of 5 timers/counters are present. It is a member of the PIC family of CPUs. The number 12 represents the number of programmable I/O ports on the board. Using oscillator type Internal makes it work.
PIC16F1825-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1825-I/ST Applications
There are a lot of Microchip Technology PIC16F1825-I/ST Microcontroller applications.
- Heater/Fan
- Hard drives
- Switches
- Fax machines
- Mice
- Routers
- Coffee machines
- Refrigerators
- Projector
- Electrocardiogram (EKG)
