PIC16F1826-E/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1826 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 15 |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1826-E/SO Overview
A space-saving advantage is that it is included in the 18-SOIC (0.295, 7.50mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tube. It is equipped with a PIC core processor. Working at -40°C~125°C TA temperature is recommended. Memory type FLASH is used for program memory. It has a number of 16I/Os. A component with the same part number as PIC16F1826 can be compared to other similar components. The terminals of this device are set to DUAL. 18 terminationals are present. It is a member of the PIC? XLP? mTouch? 16F series of electrical components. It is possible to achieve high efficiency with a 3V supply voltage. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 18 pins are used to construct it. A total of 18 pins are attached to it. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 3.5kB. It should be noted that 8mA represents the maximum supply current. It is powered by a 2/5V?source. At a frequency of 32MHz, it exhibits excellent efficiency. There are currently 3 timers/counters set up on the system. PIC CPUs are included in this part. There are a total of 15 programmable I/Os. Using a Internal oscillator type, it works well.
PIC16F1826-E/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1826-E/SO Applications
There are a lot of Microchip Technology PIC16F1826-E/SO Microcontroller applications.
- Kindle
- ECG machine
- Projector
- Dishwashers
- Fabric
- Television
- Home appliances
- Virtual reality VR robots
- Entertainment-radios, CD players, televisions
- Routers
