PIC16F1826-E/SS
| Parameters | |
|---|---|
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Core Architecture | AVR |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 15 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1826 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 2kB |
PIC16F1826-E/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. Mounted using Surface Mount. Package Tube contains it. The device has a PIC core processor. During work, the temperature should remain at -40°C~125°C TA. FLASH is the type of program memory used by it. It has a number of 16I/Os. A comparable component can be found by using the base part number PIC16F1826. This device has terminals at DUAL. It has 20 terminationals. PIC? XLP? mTouch? 16F is the series number of this electrical component. By using a 3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 20 pins are used in its construction. This device has a total of 20 pins. Subcategory Microcontrollers includes this component. Memory size for the devices is 2kB, which can be used to store programs and data. Its core architecture is based on AVR. Supply current cannot exceed 8mA. Power comes from a source of 2/5V. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. A total of 3 timers/counters are present. As part of the PIC CPU family, this component is included. There are 15 programmable input/output ports on the chip. An oscillator of type Internal is used.
PIC16F1826-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1826-E/SS Applications
There are a lot of Microchip Technology PIC16F1826-E/SS Microcontroller applications.
- Binding machines
- Torpedo guidance
- Air fryers
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Accu-check
- Embedded gateways
- Security systems
- Light sensing & controlling devices
- Mobile computers
- Dryers
