PIC16F1826-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1826 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 4mA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of Programmable I/O | 15 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 1 |
| Height | 939.8μm |
| Length | 5.9944mm |
| Width | 5.9944mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1826-I/ML Overview
Due to its space-saving qualities, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. A package of Tube contains it. The device runs in PIC core processor. Maintain a temperature of -40°C~85°C TA while working. There is FLASH program memory in it. The device has 16 I/Os. A comparable component can be found by using the base part number PIC16F1826. The position of the device is QUAD at terminal. It has 28 terminationals. The PIC? XLP? mTouch? 16F series contains this electrical component. The 3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The structure is constructed from 28 pins. It is equipped with 28 pins in total. In Microcontrollers, this component is included. The devices have a maximum memory size of 3.5kB that can be used to store programs and data. There is a source of power of 2/5V that powers this device. It performs extremely well at a frequency of 32MHz. 3 counters/timers are currently active. This part is an integral part of the PIC CPU family. The number 15 represents the number of programmable I/O ports on the board. An oscillator of type Internal is used.
PIC16F1826-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1826-I/ML Applications
There are a lot of Microchip Technology PIC16F1826-I/ML Microcontroller applications.
- Embedded gateways
- Accu-check
- Mice
- Guidance-GPS
- Washing machines
- Ipad
- Virtual reality VR robots
- Speed meter
- Sonography (Ultrasound imaging)
- Calculators
