PIC16F1826T-I/MV
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-UFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1826 |
| Pin Count | 28 |
| JESD-30 Code | S-PQCC-N28 |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 2/5V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 0.55mm |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1826T-I/MV Overview
For space savings, it is available in the 28-UFQFN Exposed Pad package. Mounted using Surface Mount. It is available in the Tape & Reel (TR) package. The device has a PIC core processor. Working at -40°C~85°C TA temperature is recommended. There is FLASH program memory in it. There are 16 I/Os on it, which makes it a very simple device. Based on the PIC16F1826 base part number, it can be compared with other components. The terminals of this device are located at QUAD. There are a total of 28 terminations in it. In the PIC? XLP? mTouch? 16F series, this electrical component is found. The supply voltage of 3V allows for high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. This device has a total of 28 pins. It falls under the category of Microcontrollers. Data and programs may be stored on the devices which have a memory size of 3.5kB. In this case, 8mA represents the maximum current supply. A 2/5V source of power is being used to run it. This device achieves excellent efficiency at frequencies of 32MHz. While deploying 5.5V, designers will be able to fully take advantage of its adaptability. There are currently 3 timers/counters set up on the system. It is one of the members of the CPU family PIC. An oscillator type Internal is required for it to work.
PIC16F1826T-I/MV Features
28-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1826T-I/MV Applications
There are a lot of Microchip Technology PIC16F1826T-I/MV Microcontroller applications.
- Blenders
- Communication-bluetooth, Wi-Fi, radio
- Heater/Fan
- Set-top boxes
- Oil and gas
- Wastewater treatment
- Magnetic resonance imaging (MRI)
- Fax machines
- Playstation
- Microwave ovens
