PIC16F1827-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1827 |
| Pin Count | 28 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 4mA |
| RAM Size | 384 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 15 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1827-I/ML Overview
A space-saving advantage is that it is included in the 28-VQFN Exposed Pad package. Surface Mount is the way to mount it. There is a Tube package available for it. It is equipped with a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. 16 I/Os are present on the device. It has a base part number of PIC16F1827 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. There are a total of 28 terminations in it. There are a number of electrical components in the PIC? XLP? mTouch? 16F series, including this one. As a result of the 3V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A total of 28 pins are used in its construction. 28 pins are on it in total. In Microcontrollers, this component is included. In the device, there is a memory capacity of 7kB which may be used to store programs and data. When working at a frequency of 32MHz it is able to achieve excellent efficiency. A total of 5 timers/counters have been set up. This part is an integral part of the PIC CPU family. There are 15 programmable input/output ports on the chip. Using an oscillator type of Internal, it works.
PIC16F1827-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1827-I/ML Applications
There are a lot of Microchip Technology PIC16F1827-I/ML Microcontroller applications.
- 3D printers
- Tape drives
- Oil and gas
- Leakage current tester
- Wastewater treatment
- Virtual reality VR robots
- Entertainment-radios, CD players, televisions
- Hand-held metering systems
- Sonography (Ultrasound imaging)
- Process control devices
