PIC16F1828-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16F1828 |
| Pin Count | 20 |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| Nominal Supply Current | 145μA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of Programmable I/O | 18 |
| Number of ADC Channels | 12 |
| Number of PWM Channels | 4 |
| Height | 4.953mm |
| Length | 26.924mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1828-I/P Overview
As a result, it is available in the 20-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. Package Tube contains it. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. It has a type of program memory of FLASH. The device has 17 I/Os. Based on the PIC16F1828 base part number, it can be compared with other components. The terminals of this device are set to DUAL. 20 terminations are present in it. It is a member of the PIC? XLP? mTouch? 16F series of electrical components. The supply voltage of 3V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 20 pins are required to construct this device. It has a total of 20 pins on it. This component is a part of Microcontrollers. In order to store data and programs, the devices have a memory size of 7kB. Using a frequency of 32MHz, it is very efficient. It appears that there are 5 timers/counters in use. PIC CPUs are included in this part. A chip with 18 programmable inputs/outputs is available. An oscillator type Internal is required for it to work.
PIC16F1828-I/P Features
20-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1828-I/P Applications
There are a lot of Microchip Technology PIC16F1828-I/P Microcontroller applications.
- Hard drives
- Robots
- Smoke alarms
- PDAs, game consoles
- Heater/Fan
- Calculators
- Glucose monitoring systems (for Type 1 Diabetes)
- Scanners
- Set-top boxes
- Removable disks
