PIC16F1829T-I/SS
| Parameters | |
|---|---|
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Number of Programmable I/O | 18 |
| Height Seated (Max) | 2mm |
| Length | 7.8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES 1.8V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1829 |
| Pin Count | 20 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 17 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 4.3mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
PIC16F1829T-I/SS Overview
Due to the benefits of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. It comes in the package?of a Tape & Reel (TR). It is equipped with a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. There are 17 I/Os on it. Based on its base part number of PIC16F1829, other similarly-sized components can be found. The terminals of this device are set to DUAL. As far as terminations are concerned, there are 20 terminations present. Part of the PIC? XLP? mTouch? 16F series, this electrical component is used in a variety of applications. Because the supply voltage is 3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 20 pins used in the construction of this device. In total, it has 20 pins. It falls under the category of Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. The maximum supply current is 4.3mA. It is highly efficient when it works at a frequency of 32MHz. There are currently 5 timers/counters set up on the system. This part is an integral part of the PIC CPU family. The number 18 represents the number of programmable I/O ports on the board. Moreover, it possesses the property of ALSO OPERATES 1.8V MINIMUM SUPPLY AT 16 MHZ. Using a Internal oscillator type, it works well.
PIC16F1829T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1829T-I/SS Applications
There are a lot of Microchip Technology PIC16F1829T-I/SS Microcontroller applications.
- Microwave ovens
- Computer/laptop
- Hearing aids
- Hard drives
- Smartphones-calling, video calling, texting, email
- DVD\DV\MP3 players
- Virtual reality VR robots
- Christmas lights
- Fire alarms
- Robots
