PIC16F1847-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16F1847 |
| Pin Count | 18 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Length | 22.86mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1847-E/P Overview
For space savings, it is available in the 18-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. It comes in a Tube package. The device has a PIC core processor. The temperature should be kept at -40°C~125°C TA while working. FLASH has been assigned to it as a program memory. 15 I/Os have been provided by the device. Based on the PIC16F1847 base part number, it can be compared with other components. At DUAL, it has its terminals. 18 terminationals are present. The electrical component is part of the series PIC? XLP? mTouch? 16F. As a result of the 3V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed with 18 pins. It has a total of 18 pins on it. This component is a part of Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. The maximum supply current is 10mA. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. It appears that there are 5 timers/counters in use. In addition, it is also capable of having the property 1.8 V MINIMUM SUPPLY AT 16 MHZ. An oscillator of type Internal is used.
PIC16F1847-E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1847-E/P Applications
There are a lot of Microchip Technology PIC16F1847-E/P Microcontroller applications.
- Digital TVs
- Dryers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Routers
- Firewalls
- Smart instruments
- Fire detection & safety devices
- Playstation
- Dishwashers
- Hand-held metering systems
