PIC16F1847-I/MV
| Parameters | |
|---|---|
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Length | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-UFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.4mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1847 |
| Pin Count | 28 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
PIC16F1847-I/MV Overview
Due to its space-saving qualities, it is available in the 28-UFQFN Exposed Pad package. The way of mounting it is Surface Mount. Tube is the package that contains it. A core processor of PIC is present in the device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. There are 15 I/Os on it, which makes it a very simple device. It has a part number of PIC16F1847 that can be used to locate similar components. At QUAD, it has its terminals. A 28 termination is contained within it. There are a number of electrical components in the PIC? XLP? mTouch? 16F series, including this one. As a result of the 3V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 28 pins are used in its construction. There are 28 pins on it. In the subcategory of Microcontrollers, this component is included. In the device, there is a memory capacity of 14kB which may be used to store programs and data. It is important to note that the maximum supply current is 10mA. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. 5 timer/counters are present. The property 1.8 V MINIMUM SUPPLY AT 16 MHZ is also present in it. Internal is the oscillator type it uses.
PIC16F1847-I/MV Features
28-UFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1847-I/MV Applications
There are a lot of Microchip Technology PIC16F1847-I/MV Microcontroller applications.
- Switches
- Digital set-top boxes
- Electromechanical control
- Industrial instrumentation devices
- Data acquisition and control
- DDC control
- Xbox
- Oscilloscopes
- Smoke alarms
- Temperature sensing and controlling devices
