PIC16F1847T-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PIC® XLP™ mTouch™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 1.8 V MINIMUM SUPPLY AT 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1847 |
| Pin Count | 20 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 15 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 10mA |
| Bit Size | 8 |
| Data Converter | A/D 12x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Integrated Cache | NO |
| RAM (words) | 1024 |
| Number of Serial I/Os | 1 |
| Number of External Interrupts | 1 |
| On Chip Data RAM Width | 8 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1847T-I/SS Overview
Due to its space-saving qualities, it is available in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. You can find it in the package of Tape & Reel (TR). The device has a PIC core processor. The temperature should be kept at -40°C~85°C TA while working. FLASH is the type of program memory used by it. There are 15 I/Os on it, which makes it a very simple device. Based on its base part number of PIC16F1847, other similarly-sized components can be found. A DUAL position is assigned to its terminals. It consists of 20 terminationals. In the PIC? XLP? mTouch? 16F series, this electrical component is found. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. There are 20 pins used in the construction of this device. A total of 20 pins are attached to it. It falls under the category of Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 14kB. Supply current is maximum at 10mA. At a frequency of 32MHz, it exhibits excellent efficiency. There are currently 5 timers/counters set up on the system. Moreover, it also has the property of 1.8 V MINIMUM SUPPLY AT 16 MHZ. It works with an oscillator type Internal.
PIC16F1847T-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1847T-I/SS Applications
There are a lot of Microchip Technology PIC16F1847T-I/SS Microcontroller applications.
- Telephone sets
- Printers
- X-ray
- Gas monitoring systems
- Hard drives
- Broadband technology, video and voice processing
- Aerospace navigation systems
- DDC control
- Firewalls
- Mobile computers
