PIC16F1933-I/SP
| Parameters | |
|---|---|
| Data Bus Width | 8b |
| Address Bus Width | 8b |
| Density | 56 kb |
| ROM (words) | 4096 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of A/D Converters | 1 |
| Number of ADC Channels | 11 |
| Number of PWM Channels | 5 |
| Number of I2C Channels | 2 |
| Height | 3.81mm |
| Length | 35.56mm |
| Width | 7.493mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Base Part Number | PIC16F1933 |
| Pin Count | 28 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 7kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| Nominal Supply Current | 3.4mA |
| RAM Size | 256 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 7KB 4K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
PIC16F1933-I/SP Overview
For the purpose of saving space, it is available in the 28-DIP (0.300, 7.62mm) package. The way of mounting it is Through Hole. A package of Tube contains it. A core processor of PIC is present in the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. 25 I/Os are present on the device. A component with the same part number as PIC16F1933 can be compared to other similar components. A DUAL position is assigned to its terminals. Currently, it consists of 28 terminationals. An electrical component such as this is included in the series PIC? XLP? 16F. Because the supply voltage is 3V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. It is constructed using 28 pins. According to Through Hole, it is mounted. A total of 28 pins are attached to it. It belongs to the subcategory Microcontrollers. Using the devices' 7kB memory size, you can store programs and data. The system is highly efficient when working at a frequency of 32MHz. PIC CPUs are included in this part. An oscillator of type Internal is used.
PIC16F1933-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1933-I/SP Applications
There are a lot of Microchip Technology PIC16F1933-I/SP Microcontroller applications.
- Answering machines
- Digital TVs
- Medical instruments chromatographs
- Volt meter
- Blenders
- Traditional industrial transformation
- Electromechanical control
- Fax machines
- Radio
- Hearing aids
