PIC16F1936-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1936 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1936-I/ML Overview
As a result, it is available in the 28-VQFN Exposed Pad package. Surface Mount is the way to mount it. It is available in the Tube package. A PIC core processor powers the device. The temperature should be kept at -40°C~85°C TA while working. The type of memory it uses is FLASH. A total of 25 I/Os are present. To find equivalent components, use its PIC16F1936 base part number. QUAD is the location of its terminals. It consists of 28 terminationals. The electrical component is part of the series PIC? XLP? 16F. This is due to the fact that the supply voltage is 3V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 28 pins are used. As a result, it is mounted in accordance with Surface Mount. It has a total of 28 pins on it. It belongs to the subcategory Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. A maximum supply current of 8mA is set. At a frequency of 32MHz, it exhibits excellent efficiency. There are 5 timers/counters. It is part of the PIC CPU family. Normally, the supply voltage (Vsup) should remain above 2.3V. Internal is the oscillator type it uses.
PIC16F1936-I/ML Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1936-I/ML Applications
There are a lot of Microchip Technology PIC16F1936-I/ML Microcontroller applications.
- Auto-breaking system
- Copiers
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Fire alarms
- Hand-held metering systems
- Digital set-top boxes
- Data acquisition and control
- Security systems
- Digital TVs
- Air fryers
