PIC16F1936-I/SS
| Parameters | |
|---|---|
| Number of I/O | 25 |
| Nominal Supply Current | 5.3mA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 11x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 8b |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 11 |
| Number of SPI Channels | 1 |
| Height | 1.85mm |
| Length | 10.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1936 |
| Pin Count | 28 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
PIC16F1936-I/SS Overview
It is available in the 28-SSOP (0.209, 5.30mm Width) package for the benefit of saving space. Using Surface Mount, it is mounted. It comes in the package?of a Tube. The device runs in PIC core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 25 I/Os are present. To find equivalent components, use its PIC16F1936 base part number. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 28 terminations present. The electrical component is part of the series PIC? XLP? 16F. The 3.3V supply voltage enables high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 28 pins are required to construct this device. It is mounted based on the method of Surface Mount. A total of 28 pins are attached to it. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 14kB. It is highly efficient when it works at a frequency of 32MHz. It appears that there are 5 timers/counters in use. It is one of the members of the CPU family PIC. Normally, the supply voltage (Vsup) should remain above 2.3V. Using oscillator type Internal makes it work.
PIC16F1936-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1936-I/SS Applications
There are a lot of Microchip Technology PIC16F1936-I/SS Microcontroller applications.
- Industrial robot
- Guidance-GPS
- Teletext terminals
- Aerospace navigation systems
- Microwave ovens
- Speed meter
- Robots
- Fabric
- Light sensing & controlling devices
- Instrument control
