PIC16F1937-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1937 |
| Pin Count | 44 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 14 |
| Number of I2C Channels | 1 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1937-E/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. Mounted using Surface Mount. Package Tube contains it. Device with PIC core processor issupported. Work should be done at -40°C~125°C TA. FLASH is the type of program memory used by it. The device has 36 I/Os. It has a part number of PIC16F1937 that can be used to locate similar components. A QUAD position is assigned to its terminals. This circuit consists of 44 terminationals. It is a member of the PIC? XLP? 16F series of electrical components. The supply voltage of 3.3V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed with 44 pins. The method of Surface Mount is used to mount it. It has a total of 44 pins on it. The component is included in Microcontrollers. In the device, there is a memory capacity of 14kB which may be used to store programs and data. Supply current cannot exceed 8mA. It performs extremely well at a frequency of 32MHz. 5 timer/counters are present. It is one of the members of the CPU family PIC. Vsup should be kept above 2.3V for normal operation. Internal is the oscillator type it uses.
PIC16F1937-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1937-E/ML Applications
There are a lot of Microchip Technology PIC16F1937-E/ML Microcontroller applications.
- Nintendo
- Gas monitoring systems
- Microwave ovens
- Dryers
- Ipod
- Virtual reality VR robots
- Volt meter
- Food and beverage
- Security systems
- Guidance-GPS
