PIC16F1937-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.600, 15.24mm) |
| Number of Pins | 40 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Base Part Number | PIC16F1937 |
| Pin Count | 40 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1937-E/P Overview
It is available in the 40-DIP (0.600, 15.24mm) package for the benefit of saving space. This is mounted using the Through Hole method. Tube is the package that contains it. Devices with PIC core processors are available. The temperature should be kept at -40°C~125°C TA while working. Memory type FLASH is used for program memory. A total of 36 I/Os are available on this device. A component with the same part number as PIC16F1937 can be compared to other similar components. A DUAL position is assigned to its terminals. It consists of 40 terminationals. The PIC? XLP? 16F series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. 40 pins are used to construct it. According to Through Hole, it is mounted. There are 40 pins on it. It is one of the components included in Microcontrollers. A device with a memory size of 14kB can store programs and data. 8mA is the maximum supply current. This device achieves excellent efficiency at frequencies of 32MHz. There are currently 5 timers/counters set up on the system. It is part of the PIC CPU family. ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ also belongs to it. Normally, the supply voltage (Vsup) should remain above 2.3V. Using a Internal oscillator type, it works well.
PIC16F1937-E/P Features
40-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F1937-E/P Applications
There are a lot of Microchip Technology PIC16F1937-E/P Microcontroller applications.
- Measuring revolving objects
- Fire detection & safety devices
- Robotic prosthetic limbs
- Smartphones-calling, video calling, texting, email
- Blenders
- Fax machines
- Gas monitoring systems
- Smart highways (navigation, traffic control, information monitoring and car service)
- Laminators
- Digital set-top boxes
