PIC16F1937-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1937 |
| Pin Count | 44 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| Nominal Supply Current | 5.3mA |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| Address Bus Width | 8b |
| Density | 112 kb |
| EEPROM Size | 256 x 8 |
| CPU Family | PIC |
| Number of ADC Channels | 14 |
| Number of PWM Channels | 5 |
| Number of I2C Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1937-I/PT Overview
A space-saving advantage is that it is included in the 44-TQFP package. Surface Mount is the way to mount it. There is a Tray package available for it. A PIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. Memory type FLASH is used for program memory. There are 36 I/Os on the board. Based on the PIC16F1937 base part number, it can be compared with other components. The terminals are positioned at QUAD. Currently, it consists of 44 terminationals. PIC? XLP? 16F is the series number of this electrical component. Using the 3.3V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. A total of 44 pins are required to construct this device. According to Surface Mount, it is mounted. A total of 44 pins are attached to it. In the subcategory of Microcontrollers, this component is included. Data and programs may be stored on the devices which have a memory size of 14kB. When working at a frequency of 32MHz it is able to achieve excellent efficiency. The part is a part of the PIC CPU family. For normal operation, the supply voltage (Vsup) should be kept above 2.3V. Using oscillator type Internal makes it work.
PIC16F1937-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1937-I/PT Applications
There are a lot of Microchip Technology PIC16F1937-I/PT Microcontroller applications.
- Dishwashers
- Mice
- Accu-check
- Temperature sensing and controlling devices
- Electromechanical control
- Current meter
- Fax machines
- Hand-held metering systems
- Glucose monitoring systems (for Type 1 Diabetes)
- DCS control intelligent sensor
