PIC16F1937T-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1937 |
| Pin Count | 44 |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 14kB |
| Oscillator Type | Internal |
| Number of I/O | 36 |
| RAM Size | 512 x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 14KB 8K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Supply Current-Max | 8mA |
| Bit Size | 8 |
| Data Converter | A/D 14x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 5 |
| ROM (words) | 8192 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F1937T-I/ML Overview
For the purpose of saving space, it is available in the 44-VQFN Exposed Pad package. This is mounted using the Surface Mount method. There is a Tape & Reel (TR) package available for it. It is equipped with a PIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. 36 I/Os can be found on it. In order to find similar components, it has a base part number of PIC16F1937. A QUAD position is assigned to its terminals. A 44 termination is contained within it. Part of the PIC? XLP? 16F series, this electrical component is used in a variety of applications. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 44 pins are used. As a result, it is mounted in accordance with Surface Mount. There are a total of 44 pins on it. This component is a part of Microcontrollers. Memory size for the devices is 14kB, which can be used to store programs and data. It is important to note that the maximum supply current is 8mA. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. There are 5 timers/counters. As part of the PIC CPU family, this component is included. ALSO OPERATES AT 1.8V MINIMUM SUPPLY FOR 16 MHZ also belongs to it. Normal operation requires a supply voltage (Vsup) above 2.3V. It works with an oscillator type Internal.
PIC16F1937T-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1937T-I/ML Applications
There are a lot of Microchip Technology PIC16F1937T-I/ML Microcontroller applications.
- Instrument control
- Vacuum cleaners
- Hand-held metering systems
- Guidance-GPS
- Data acquisition and control
- Projectors
- Virtual reality VR robots
- Digital set-top boxes
- Embedded gateways
- X-ray
