PIC16F1947T-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | PIC® XLP™ 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | FLAT |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 32MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F1947 |
| Pin Count | 64 |
| Interface | I2C, LIN, SPI, UART, USART |
| Memory Size | 28kB |
| Oscillator Type | Internal |
| Number of I/O | 54 |
| RAM Size | 1K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.8V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 28KB 16K x 14 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 17x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16 |
| ROM (words) | 16384 |
| EEPROM Size | 256 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F1947T-I/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. This is mounted using the Surface Mount method. A package of Tape & Reel (TR) contains it. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. There are 54 I/Os on the board. Based on its base part number of PIC16F1947, other similarly-sized components can be found. At QUAD, its terminals are located. This circuit consists of 64 terminationals. This electrical component is part of the PIC? XLP? 16F series. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. For its construction, 64 pins are used. There are 64 pins on it. Subcategory Microcontrollers includes this component. Memory size for the devices is 28kB, which can be used to store programs and data. This device works well at 32MHz frequency when it is operating at a high rate of efficiency. 5 timers/counters are in use. It belongs to the PIC CPU family. Internal is the oscillator type it uses.
PIC16F1947T-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F1947T-I/PT Applications
There are a lot of Microchip Technology PIC16F1947T-I/PT Microcontroller applications.
- Microwave ovens
- Robots
- Heater/Fan
- Switches
- Broadband technology, video and voice processing
- Automatic control
- Gas monitoring systems
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Xbox
- Process control devices
