PIC16F526-E/MG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 2V MINIMUM SUPPLY FOR 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 700mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F526 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 1.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 67 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.5KB 1K x 12 |
| Supply Current-Max | 2.2mA |
| Bit Size | 8 |
| Data Converter | A/D 3x8b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| On Chip Program ROM Width | 12 |
| CPU Family | PIC |
| Number of Programmable I/O | 12 |
| Height Seated (Max) | 0.9mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F526-E/MG Overview
It is available in the 16-VFQFN Exposed Pad package for the benefit of saving space. This is mounted using the Surface Mount method. There is a Tube package available for it. Device with PIC core processor issupported. It is important to keep the temperature at -40°C~125°C TA while working. Memory type FLASH is used for program memory. There are 11 I/Os on it. It has a base part number of PIC16F526 that can be used to find other components that are comparable. The terminals of this device are set to QUAD. There are a total of 16 terminations in it. In the PIC? 16F series, this electrical component is found. The supply voltage of 5V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 16 pins are used. In total, it has 16 pins. It belongs to the subcategory Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 1.5kB. Supply current is maximum at 2.2mA. It is powered by a 2.5/5V?source. Using a frequency of 20MHz, it is very efficient. There are 1 timers/counters. The part is a part of the PIC CPU family. The number 12 represents the number of programmable I/O ports on the board. There is also the property of ALSO OPERATES AT 2V MINIMUM SUPPLY FOR 4 MHZ. Normally, the supply voltage (Vsup) should remain above 4.5V. Using an oscillator type of Internal, it works.
PIC16F526-E/MG Features
16-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F526-E/MG Applications
There are a lot of Microchip Technology PIC16F526-E/MG Microcontroller applications.
- Current meter
- Torpedo guidance
- Copiers
- Tape drives
- Toys
- Robots
- Missile control
- Industrial robot
- Computed Tomography (CT scan)
- Walkie talkies
