PIC16F54-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F54 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 768B |
| Oscillator Type | External |
| Number of I/O | 12 |
| RAM Size | 25 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 768B 512 x 12 |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| ROM (words) | 512 |
| CPU Family | PIC |
| Height | 4.953mm |
| Length | 23.368mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F54-E/P Overview
For space savings, it is available in the 18-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. A package of Tube contains it. A core processor of PIC is present in the device. Work should be performed at a temperature of -40°C~125°C TA. The type of memory it uses is FLASH. 12 I/Os are present on the device. Based on the PIC16F54 base part number, it can be compared with other components. The terminals of this device are located at DUAL. A 18 termination is contained within it. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Because of the 3V voltage of the supply, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. 18 pins are used to construct it. A method of mounting is used, which is Through Hole. It is equipped with 18 pins in total. It belongs to the subcategory Microcontrollers. The devices have a memory size of 768B that can be used to store programs and data. It should be noted that 7mA represents the maximum supply current. There is 2/5.5V power source in this device. It is highly efficient when it works at a frequency of 20MHz. 1 counters/timers are currently active. This part is an integral part of the PIC CPU family. Moreover, it also has the property of OPERATES AT 2 V MINIMUM SUPPLY @ 4 MHZ. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. Using an oscillator type of External, it works.
PIC16F54-E/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F54-E/P Applications
There are a lot of Microchip Technology PIC16F54-E/P Microcontroller applications.
- Auto-breaking system
- Oil and gas
- Gas monitoring systems
- Scanners
- Television
- Xbox
- Dishwashers
- Hearing aids
- Tape drives
- Keyboards
