PIC16F57-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F57 |
| Pin Count | 28 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 3kB |
| Oscillator Type | External |
| Number of I/O | 20 |
| Nominal Supply Current | 400μA |
| RAM Size | 72 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3KB 2K x 12 |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | NO |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Address Bus Width | 8b |
| Density | 24 kb |
| CPU Family | PIC |
| Height | 4.953mm |
| Length | 39.75mm |
| Width | 14.732mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F57-I/P Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.600, 15.24mm) package. A Through Hole mounting method is used. This item can be found in package Tube. PIC core processor is present on the device. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 20 I/Os have been provided by the device. In order to find similar components, it has a base part number of PIC16F57. At DUAL, its terminals are located. 28 terminationals are present. An electrical component such as this is included in the series PIC? 16F. As a result of the 3V supply voltage, high efficiency is possible. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. A number of 28 pins are used to construct it. During the mounting process, the device is mounted based on the Through Hole method. There are 28 pins on it. It is one of the components included in Microcontrollers. Memory size for the devices is 3kB, which can be used to store programs and data. A 2/5.5V source of power is being used to run it. When working at a frequency of 20MHz it is able to achieve excellent efficiency. 1 timers/counters are in use. This part is an integral part of the PIC CPU family. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2V. An oscillator of type External is used.
PIC16F57-I/P Features
28-DIP (0.600, 15.24mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F57-I/P Applications
There are a lot of Microchip Technology PIC16F57-I/P Microcontroller applications.
- Blenders
- Traditional industrial transformation
- Heater/Fan
- Oscilloscopes
- Radio
- X-ray
- Digital set-top boxes
- Industrial instrumentation devices
- Kindle
- Television
