PIC16F610-E/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Base Part Number | PIC16F610 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Supply Current-Max | 3.35mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 5.334mm |
| Length | 19.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
PIC16F610-E/P Overview
As a result, it is available in the 14-DIP (0.300, 7.62mm) package. A Through Hole mounting method is used. It comes in a Tube package. It is equipped with a PIC core processor. Work should be done at -40°C~125°C TA. Its type of program memory is FLASH. There are 11 I/Os on it. To find equivalent components, use its PIC16F610 base part number. A DUAL position is assigned to its terminals. 14 terminationals are present. Part of the PIC? 16F series, this electrical component is used in a variety of applications. The supply voltage of 5V allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 14 pins are required to construct this device. Mounting is performed in accordance with Through Hole. It has a total of 14 pins on it. This is a component included in Microcontrollers. Data and programs can be stored on the devices with a memory size of 1.8kB. The maximum supply current is set at 3.35mA. Using a frequency of 20MHz, it is very efficient. 2 timer/counters are present. It is a member of the PIC family of CPUs. Normal operation requires a supply voltage (Vsup) above 4.5V. Using oscillator type Internal makes it work.
PIC16F610-E/P Features
14-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F610-E/P Applications
There are a lot of Microchip Technology PIC16F610-E/P Microcontroller applications.
- Sonography (Ultrasound imaging)
- Instrument control
- Dryers
- Industrial instrumentation devices
- Smoke alarms
- Speed meter
- Magnetic resonance imaging (MRI)
- Calculator
- Mice
- Robotic prosthetic limbs
