PIC16F610-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F610 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| RAM Size | 64 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Supply Current-Max | 3.35mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 2 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F610-I/ML Overview
Due to the benefits of saving space, it is available in the 16-VQFN Exposed Pad package. Surface Mount is used for mounting. It comes in the package?of a Tube. Devices with PIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. There are 11 I/Os on the board. A comparable component can be found by using the base part number PIC16F610. QUAD is the location of its terminals. In this case, there are 16 terminationals. The electrical component is part of the series PIC? 16F. Using the 5V supply voltage allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed with 16 pins. This mount is done in accordance with the method of Surface Mount. It is equipped with 16 pins in total. This component is a part of Microcontrollers. Data and programs can be stored on the devices with a memory size of 1.8kB. There is a maximum current supply of 3.35mA. At a frequency of 20MHz, it exhibits excellent efficiency. 2 timers/counters are in use. As part of the PIC CPU family, this component is included. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. The oscillator type Internal is used to operate the device.
PIC16F610-I/ML Features
16-VQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F610-I/ML Applications
There are a lot of Microchip Technology PIC16F610-I/ML Microcontroller applications.
- Automatic staplers
- Calculator
- DVD\DV\MP3 players
- Projector
- Telephone sets
- Laminators
- Torpedo guidance
- Hand-held metering systems
- Magnetic resonance imaging (MRI)
- Toys
