PIC16F616-I/ST
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F616 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | RS-232, USB |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 11 |
| Nominal Supply Current | 220μA |
| RAM Size | 128 x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Bit Size | 8 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| CPU Family | PIC |
| Number of ADC Channels | 8 |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F616-I/ST Overview
There is a 14-TSSOP (0.173, 4.40mm Width) package available to save space. Using Surface Mount, it is mounted. It comes in the package?of a Tube. With a processor of PIC cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. There is FLASH program memory in it. A total of 11 I/Os are present. In order to find similar components, it has a base part number of PIC16F616. The terminals of this device are set to DUAL. This circuit consists of 14 terminationals. Part of the PIC? 16F series, this electrical component is used in a variety of applications. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. A total of 14 pins are required to construct this device. According to Surface Mount, it is mounted. Total number of pins is 14. It falls under the category of Microcontrollers. The devices have a memory size of 3.5kB that can be used to store programs and data. A 2/5.5V power source powers it. The system is highly efficient when working at a frequency of 20MHz. A total of 3 timers/counters are present. This part is part of the PIC family of CPUs. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.5V. There is an oscillator type Internal used in this circuit.
PIC16F616-I/ST Features
14-TSSOP (0.173, 4.40mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F616-I/ST Applications
There are a lot of Microchip Technology PIC16F616-I/ST Microcontroller applications.
- Xbox
- Communication-bluetooth, Wi-Fi, radio
- Missile control
- Heater/Fan
- Projector
- Food and beverage
- Virtual reality VR robots
- Industrial instrumentation devices
- ECG machine
- Smart highways (navigation, traffic control, information monitoring and car service)
