PIC16F627-04E/SS
| Parameters | |
|---|---|
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
PIC16F627-04E/SS Overview
There is a 20-SSOP (0.209, 5.30mm Width) package available to save space. A Surface Mount mounting method is used. Package Tube contains it. It is equipped with a PIC core processor. The temperature should be kept at -40°C~125°C TA while working. Memory type FLASH is used for program memory. There are 16 I/Os on it. Based on the PIC16F627 base part number, it can be compared with other components. At DUAL, it has its terminals. A 20 termination is contained within it. It is a member of the PIC? 16F series of electrical components. As a result of the 5V supply voltage, high efficiency is possible. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A total of 20 pins are used in its construction. On it, there are 20 pins. This component is a part of Microcontrollers. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. This device works well at 4MHz frequency when it is operating at a high rate of efficiency. It appears that there are 3 timers/counters in use. This part is an integral part of the PIC CPU family. A supply voltage (Vsup) above 3V is necessary for normal operation. An oscillator of type Internal is used.
PIC16F627-04E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627-04E/SS Applications
There are a lot of Microchip Technology PIC16F627-04E/SS Microcontroller applications.
- Toys
- Entertainment products
- Information appliances (networking of household appliances)
- Walkie talkies
- Tape drives
- Home video and audio
- Oil and gas
- Mice
- Microwave ovens
- Guidance-GPS
