PIC16F627-04/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | PIC16F627 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 600μA |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of Ethernet Channels | 1 |
| Height | 3.68mm |
| Length | 22.99mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627-04/P Overview
To save space, it is included in the 18-DIP (0.300, 7.62mm) package. The way of Through Hole is used to mount it. Tube is the package that contains it. The device has a PIC core processor. Work should be performed at a temperature of 0°C~70°C TA. Memory type FLASH is used for program memory. There are 16 I/Os on it, which makes it a very simple device. Based on the PIC16F627 base part number, it can be compared with other components. The terminals of this device are set to DUAL. There are a total of 18 terminations in it. It is a member of the PIC? 16F series of electrical components. By using a 5V voltage supply, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A number of 18 pins are used to construct it. A total of 18 pins are attached to it. The component is included in Microcontrollers. A device with a memory size of 1.8kB can store programs and data. At a frequency of 4MHz, it can achieve excellent efficiency. It appears that there are 3 timers/counters in use. This part is an integral part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 3V. The oscillator type Internal is used to operate the device.
PIC16F627-04/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F627-04/P Applications
There are a lot of Microchip Technology PIC16F627-04/P Microcontroller applications.
- Current meter
- Gas monitoring systems
- Projectors
- X-ray
- Multi-meter
- Speed meter
- Paper shredders
- Smart instruments
- Electrocardiogram (EKG)
- Smartphones-calling, video calling, texting, email
