PIC16F627-20I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627 |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627-20I/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. You can find it in the package of Tube. Device with PIC core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 16 I/Os are available on this device. To find comparable components, use the PIC16F627 base part number. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 20 terminations present. PIC? 16F is the series number of this electrical component. As a result of the 5V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 20 pins are used. There are 20 pins on it. In the subcategory of Microcontrollers, this component is included. Data and programs can be stored on the devices with a memory size of 1.8kB. Supply current is maximum at 7mA. At a frequency of 20MHz, it can achieve excellent efficiency. 3 counters/timers are currently active. This part is an integral part of the PIC CPU family. In order to ensure normal operation, the supply voltage (Vsup) must remain above 4.5V. Using an oscillator type Internal, it operates.
PIC16F627-20I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627-20I/SS Applications
There are a lot of Microchip Technology PIC16F627-20I/SS Microcontroller applications.
- Industrial instrumentation devices
- Gas monitoring systems
- Ipod
- Accu-check
- Light sensing & controlling devices
- Telephone sets
- Pacemakers (used to control abnormal heart rhythm)
- Data acquisition and control
- Electrocardiogram (EKG)
- Home appliances
