PIC16F627A-E/SS
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
PIC16F627A-E/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. This item can be found in package Tube. There is a PIC as core processor in this device. Working at -40°C~125°C TA temperature is recommended. FLASH is the type of program memory used by it. A total of 16 I/Os are present. A comparable component can be found by using the base part number PIC16F627A. This device has terminals at DUAL. As far as terminations are concerned, there are 20 terminations present. PIC? 16F is the series number of this electrical component. The 5V supply voltage enables high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. For its construction, 20 pins are used. This mount is done in accordance with the method of Surface Mount. A total of 20 pins are attached to it. It belongs to the subcategory Microcontrollers. Using the devices' 1.8kB memory size, you can store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. There are 3 timers/counters. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) above 4.5V. Using an oscillator type Internal, it operates.
PIC16F627A-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627A-E/SS Applications
There are a lot of Microchip Technology PIC16F627A-E/SS Microcontroller applications.
- Answering machines
- Smart instruments
- Oil and gas
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Radio
- Printers
- Toys
- Light sensing & controlling devices
- PDAs, game consoles
- Kindle
