PIC16F627A-I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Base Part Number | PIC16F627A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 600μA |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 14 kb |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of PWM Channels | 1 |
| Height | 4.953mm |
| Length | 23.37mm |
| Width | 7.112mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627A-I/P Overview
There is a 18-DIP (0.300, 7.62mm) package available to save space. It is mounted using the way of Through Hole. It comes in a Tube package. There is a PIC as core processor in this device. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. 16 I/Os are present on the device. It has a base part number of PIC16F627A that can be used to find other components that are comparable. A DUAL position is assigned to its terminals. A 18 termination is contained within it. This electrical component is part of the PIC? 16F series. Using the 5V supply voltage allows for high efficiency. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. A number of 18 pins are used to construct it. Based on the Through Hole method, it is mounted. There are a total of 18 pins on it. Microcontrollers contains this component. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. Using a frequency of 20MHz, it is very efficient. In total, there are 3 timers and counters. As part of the PIC CPU family, this component is included. Vsup should be kept above 4.5V for normal operation. An oscillator type Internal is required for it to work.
PIC16F627A-I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F627A-I/P Applications
There are a lot of Microchip Technology PIC16F627A-I/P Microcontroller applications.
- Graphic terminals
- Entertainment products
- Microwave ovens
- Automatic staplers
- Embedded gateways
- Automatic control
- Robots
- Digital TVs
- Printers
- Traditional industrial transformation
