PIC16F627A-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 600μA |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 14 kb |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of PWM Channels | 1 |
| Height | 2.35mm |
| Length | 11.55mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627A-I/SO Overview
To save space, it is included in the 18-SOIC (0.295, 7.50mm Width) package. A Surface Mount mounting method is used. It is available in the Tube package. It is equipped with a PIC core processor. Working at -40°C~85°C TA temperature is recommended. In terms of its program memory type, it is FLASH. It has a number of 16I/Os. A comparable component can be found by using the base part number PIC16F627A. At DUAL, it has its terminals. This circuit consists of 18 terminationals. The PIC? 16F series contains this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 18 pins used in the construction of this device. Based on the Surface Mount method, it is mounted. It is equipped with 18 pins in total. It belongs to the subcategory Microcontrollers. Using the devices' 1.8kB memory size, you can store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. There are 3 timers/counters. This part is an integral part of the PIC CPU family. In order to maintain normal operation, Vsup must be above 4.5V. Using an oscillator type Internal, it operates.
PIC16F627A-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627A-I/SO Applications
There are a lot of Microchip Technology PIC16F627A-I/SO Microcontroller applications.
- Xbox
- Robots
- Instrument control
- Heart rate monitors
- Nintendo
- Air fryers
- DCS control intelligent sensor
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital cameras
- Temperature sensing and controlling devices
