PIC16F627AT-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627AT-E/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. A Surface Mount mounting method is used. In the package Tape & Reel (TR), it is included. PIC core processor is present on the device. Work should be performed at a temperature of -40°C~125°C TA. Its type of program memory is FLASH. There are 16 I/Os on it, which makes it a very simple device. A component with the same part number as PIC16F627A can be compared to other similar components. The terminals of this device are located at DUAL. As far as terminations are concerned, there are 20 terminations present. Part of the PIC? 16F series, this electrical component is used in a variety of applications. The 5V supply voltage enables high efficiency. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. It is constructed with 20 pins. According to Surface Mount, it is mounted. On it, there are 20 pins. Microcontrollers contains this component. Data and programs can be stored on the devices with a memory size of 1.8kB. It performs extremely well at a frequency of 20MHz. There are 3 timers/counters. As part of the PIC CPU family, this component is included. Vsup should be kept above 4.5V for normal operation. There is an oscillator type Internal used in this circuit.
PIC16F627AT-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627AT-E/SS Applications
There are a lot of Microchip Technology PIC16F627AT-E/SS Microcontroller applications.
- DCS control intelligent sensor
- Microwave ovens
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Glucose monitoring systems (for Type 1 Diabetes)
- Printers
- Binding machines
- Speed meter
- Heater/Fan
- Ipod
- Wastewater treatment
