PIC16F627AT-I/SO
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627A |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2.65mm |
| Length | 11.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F627AT-I/SO Overview
A space-saving advantage is that it is included in the 18-SOIC (0.295, 7.50mm Width) package. This is mounted using the Surface Mount method. It comes in the package?of a Tape & Reel (TR). The device has a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. There is FLASH program memory in it. The device has 16 I/Os. A component with the same part number as PIC16F627A can be compared to other similar components. The terminals of this device are set to DUAL. It consists of 18 terminationals. An electrical component such as this is included in the series PIC? 16F. Because of the 5V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 18 pins are used. As a result, it is mounted in accordance with Surface Mount. On it, there are 18 pins. Subcategory Microcontrollers includes this component. In the device, there is a memory capacity of 1.8kB which may be used to store programs and data. It performs extremely well at a frequency of 20MHz. A total of 3 timers/counters are present. It is part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 4.5V. Internal is the oscillator type it uses.
PIC16F627AT-I/SO Features
18-SOIC (0.295, 7.50mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627AT-I/SO Applications
There are a lot of Microchip Technology PIC16F627AT-I/SO Microcontroller applications.
- Sonography (Ultrasound imaging)
- Heater/Fan
- Temperature sensing and controlling devices
- Projectors
- Fabric
- Industrial instrumentation devices
- Keyboards
- Mice
- Telephone sets
- Monitoring-temperature level, oil level, speed, distance, acceleration
