PIC16F627AT-I/SS
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F627A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 1.8kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 1.75KB 1K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 1024 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
PIC16F627AT-I/SS Overview
Due to the benefits of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. It comes in the package?of a Tape & Reel (TR). The device runs in PIC core processor. Working at -40°C~85°C TA temperature is recommended. Its type of program memory is FLASH. 16 I/Os have been provided by the device. To find comparable components, use the PIC16F627A base part number. The terminals are positioned at DUAL. There are a total of 20 terminations in it. The PIC? 16F series includes this electrical component. The 5V supply voltage enables high efficiency. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. There are 20 pins used in the construction of this device. Mounting is performed in accordance with Surface Mount. 20 pins are on it in total. In the subcategory of Microcontrollers, this component is included. The devices have a memory size of 1.8kB that can be used to store programs and data. Working at a frequency of 20MHz results in excellent efficiency. A total of 3 timers/counters have been set up. CPU family PIC comprises the part. Normal operation requires a supply voltage (Vsup) above 4.5V. An oscillator of type Internal is used.
PIC16F627AT-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F627AT-I/SS Applications
There are a lot of Microchip Technology PIC16F627AT-I/SS Microcontroller applications.
- Magnetic resonance imaging (MRI)
- Tape drives
- Temperature sensing and controlling devices
- Paper shredders
- Smoke alarms
- 3D printers
- Data acquisition and control
- Xbox
- Ipod
- DCS control intelligent sensor
