PIC16F628-04I/P
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 4MHz |
| Base Part Number | PIC16F628 |
| Pin Count | 18 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SCI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 600μA |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 4 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of Ethernet Channels | 1 |
| Height | 3.68mm |
| Length | 22.99mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F628-04I/P Overview
There is a 18-DIP (0.300, 7.62mm) package available to save space. Through Hole is used for mounting. You can find it in the package of Tube. The device has a PIC core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 16 I/Os on it. Based on the PIC16F628 base part number, it can be compared with other components. DUAL is the position of its terminals on the board. In this case, there are 18 terminationals. PIC? 16F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. The structure is constructed from 18 pins. A total of 18 pins are attached to it. This component is a part of Microcontrollers. The devices have a memory size of 3.5kB that can be used to store programs and data. At a frequency of 4MHz, it exhibits excellent efficiency. 3 timers/counters are in use. This part is an integral part of the PIC CPU family. Normal operation requires a supply voltage (Vsup) that is higher than 3V. An oscillator of type Internal is used.
PIC16F628-04I/P Features
18-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Microcontrollers subcategory
PIC16F628-04I/P Applications
There are a lot of Microchip Technology PIC16F628-04I/P Microcontroller applications.
- Electrocardiogram (EKG)
- Smart highways (navigation, traffic control, information monitoring and car service)
- Calculators
- Ipod
- Home appliances
- Sonography (Ultrasound imaging)
- Accu-check
- Teletext terminals
- Fax machines
- Oil and gas
