PIC16F628A-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F628A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F628A-E/SS Overview
To save space, it is included in the 20-SSOP (0.209, 5.30mm Width) package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. Device with PIC core processor issupported. Maintain a temperature of -40°C~125°C TA while working. The type of memory it uses is FLASH. A total of 16 I/Os are available on this device. To find equivalent components, use its PIC16F628A base part number. The terminals of this device are located at DUAL. 20 terminationals are present. There are a number of electrical components in the PIC? 16F series, including this one. By using a 5V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. There are 20 pins used in the construction of this device. The method of Surface Mount is used to mount it. A total of 20 pins are attached to it. It belongs to the subcategory Microcontrollers. Using the devices' 3.5kB memory size, you can store programs and data. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. 3 timers/counters are in use. It is part of the PIC CPU family. A supply voltage (Vsup) above 4.5V is necessary for normal operation. Internal is the oscillator type it uses.
PIC16F628A-E/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F628A-E/SS Applications
There are a lot of Microchip Technology PIC16F628A-E/SS Microcontroller applications.
- Telephone sets
- Blood pressure monitors
- Computer/laptop
- Sonography (Ultrasound imaging)
- Blenders
- Embedded gateways
- Toasters
- Security systems
- Instrument control
- Binding machines
