PIC16F628A-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F628A |
| Pin Count | 20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| Nominal Supply Current | 600μA |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Number of Bits | 8 |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| Address Bus Width | 8b |
| Density | 28 kb |
| EEPROM Size | 128 x 8 |
| CPU Family | PIC |
| Number of PWM Channels | 1 |
| Height | 1.85mm |
| Length | 7.5mm |
| Width | 5.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F628A-I/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. This is mounted using the Surface Mount method. This item can be found in package Tube. PIC core processor is present on the device. The temperature should be kept at -40°C~85°C TA while working. There is FLASH program memory in it. A total of 16 I/Os are available on this device. A comparable component can be found by using the base part number PIC16F628A. The terminals of this device are set to DUAL. 20 terminationals are present. There are a number of electrical components in the PIC? 16F series, including this one. Because the supply voltage is 5V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. 20 pins are used to construct it. According to Surface Mount, it is mounted. There are a total of 20 pins on it. It belongs to the subcategory Microcontrollers. Data and programs may be stored on the devices which have a memory size of 3.5kB. Working at a frequency of 20MHz results in excellent efficiency. The number of timers and counters is 3. PIC CPUs are included in this part. During normal operation, the supply voltage (Vsup) should be kept above 4.5V. There is an oscillator type Internal used in this circuit.
PIC16F628A-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F628A-I/SS Applications
There are a lot of Microchip Technology PIC16F628A-I/SS Microcontroller applications.
- Christmas lights
- Hearing aids
- Dishwashers
- Refrigerators
- Washing machines
- Accu-check
- Missile control
- Heater/Fan
- Fax machines
- Data acquisition and control
