PIC16F628AT-I/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 18 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | PIC® 16F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | PIC16F628A |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SCI, UART, USART |
| Memory Size | 3.5kB |
| Oscillator Type | Internal |
| Number of I/O | 16 |
| RAM Size | 224 x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | PIC |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 3.5KB 2K x 14 |
| Connectivity | UART/USART |
| Bit Size | 8 |
| Watchdog Timer | Yes |
| Access Time | 20 μs |
| Has ADC | NO |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 3 |
| ROM (words) | 2048 |
| EEPROM Size | 128 x 8 |
| On Chip Program ROM Width | 14 |
| CPU Family | PIC |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
PIC16F628AT-I/SS Overview
For the purpose of saving space, it is available in the 20-SSOP (0.209, 5.30mm Width) package. The way of Surface Mount is used to mount it. It comes in a Tape & Reel (TR) package. There is a PIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 16 I/Os on the board. To find comparable components, use the PIC16F628A base part number. DUAL is the location of its terminals. There are a total of 20 terminations in it. There are a number of electrical components in the PIC? 16F series, including this one. The supply voltage of 5V allows for high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. It is constructed using 18 pins. The mounting of this device is carried out following the method of Surface Mount. On it, there are 20 pins. It is one of the components included in Microcontrollers. The devices have a memory size of 3.5kB that can be used to store programs and data. At a frequency of 20MHz, it exhibits excellent efficiency. 3 counters/timers are currently active. This part is part of the PIC family of CPUs. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. An oscillator of type Internal is used.
PIC16F628AT-I/SS Features
20-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Microcontrollers subcategory
PIC16F628AT-I/SS Applications
There are a lot of Microchip Technology PIC16F628AT-I/SS Microcontroller applications.
- Fabric
- Dryers
- Industrial instrumentation devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Dishwashers
- Process control devices
- PDAs, game consoles
- Robotic prosthetic limbs
- Electromechanical control
- Oil and gas
